Using The Timer; Setting The Wake-Up Timer - Pioneer S-HTD340 Operating Instructions Manual

Using the timer

Chapter 8
Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct time
for the wake-up timer to work properly (see
Setting the clock on page 27).
STANDBY/ON
FM/AM
DVD/CD TUNER
VOLUME
SHIFT
L1/L2
TV LINE
ENTER
TIMER
ENTER
1 Select the source you want played.
For example, press TUNER (TUNER FM/AM/
ST. on the front panel) to select the radio as
your source.
2 Prepare the source.
For example, tune in the radio station you want
to wake up to.
3 Set the volume.
4 Press TIMER (SHIFT + 6) twice to reach
the timer menu.
5 Use the (cursor left/right) buttons
to select 'Wake-Up?' then press ENTER.
6 Use the (cursor left/right) buttons
to select 'Timer Edit?' then press ENTER.
7 Set the switch-on time.
Use the (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you're
done.
8 Set the switch-off time.
Use the (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you're
done.
After pressing ENTER this last time, the wake-
up indicator lights, and the switch-on, switch-
off times, the function (DVD/CD, etc.) and
volume are confirmed in the display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system is
left on!
08
55
En