Listening To Station Presets; Listening To Other Sources - Pioneer S-HTD340 Operating Instructions Manual

04 Getting started

Listening to station presets

1 Make sure the TUNER function is
selected.
2 Use ST +/– or the number buttons to
select a station preset.
• If you are using the front panel controls,
press TUNER FM/AM/ST. until you're in
station preset mode, then use the
and
preset.

Listening to other sources

You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also Listening
to TV audio through this system on page 16 and
Connecting auxiliary components on page 71.
1 If the system isn't already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Select the source you want to listen to.
• If you're using the remote control, press TV
to select the TV input, or use the LINE (L1/
L2) button to select the LINE 1 or LINE 2
input.
• The TV/L1/L2 button on the front panel
switches between the three inputs.
3 If necessary, start playback of the
external source.
36
En
buttons to select a station
STANDBY/ON
L1/L2
TV LINE