Setting The Channel Levels - Pioneer S-HTD340 Operating Instructions Manual

09 Surround sound and other settings
Function setting for DVD input
• DVD -> OFF/PDP1–5/PDPTV – Matches
the DVD function of this unit with a
numbered video input on the plasma
display. For example, DVD -> PDP2
matches the DVD input with video input 2
on the plasma display.
Function setting for TV input
• TV -> OFF/PDP1–5/PDPTV – Matches the
TV function of this unit with a numbered
video input on the plasma display. For
example, TV -> PDP1 matches the TV
input with video input 1 on the plasma
display.
Function setting for L1 input
• LINE1 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L1) function of this unit with a
numbered video input on the plasma
display. For example, LINE1 -> PDP3
matches the LINE1 input with video input 3
on the plasma display.
Function setting for L2 input
• LINE2 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L2) function of this unit with a
numbered video input on the plasma
display. For example, LINE2 -> PDP3
matches the LINE2 input with video input 3
on the plasma display.
60
En

Setting the channel levels

You can set the relative channel levels from
your main listening position for all of the
listening modes independently (except
STEREO).
If you used the Room Setup feature (page 27),
the channel levels for each listening mode will
already be set. However, you can still fine-tune
the levels here if you need to.
SURROUND
VOLUME
TEST TONE CH LEVEL
SHIFT
1 Select a listening mode.
Press SURROUND, ADVANCED or FRONT
SURROUND repeatedly to select the listening
mode you want.
2 Press TEST TONE (SHIFT + 4) to hear the
test tone.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• RS – Right surround speaker
ADVANCED
ENTER