Output; Listening To Tv Audio Through This; System; Using This Unit With A Pioneer Plasma - Pioneer S-HTD340 Operating Instructions Manual

02 Connecting up

Listening to TV audio through this

system

You can connect the audio output of your TV to
this system so that broadcast TV sound is
played through this system.
• Connect a stereo audio cable (not
supplied) from the audio outputs of your
TV to the TV IN jacks on this system.
TV
AUDIO
COAXIAL IN
LINE 2
• If you find that the TV audio is distorting
when played through this system, you can
set the input attenuator to reduce the input
signal level. See Optional system settings
on page 67 to do this.
16
En
AUDIO

OUTPUT

ANTENNA
AM LOOP
ANTENNA
OUT IN IN
L L
FM
UNBAL
75
R R
LINE 1 TV
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display (models
PRO-1110HD, PRO-910HD, PDP-5040HD,
PDP-4340HD), you can use an SR+ cable (see
note below) to connect it to this unit and take
advantage of various convenient features,
such as automatic video input switching of the
plasma display when the input is changed.
Pioneer plasma display
Media receiver
• Use a 3-ringed miniplug SR+ cable to
connect the CONTROL IN jack of this unit
through a media receiver to the CONTROL
OUT jack of your plasma display.
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ control options for Pioneer plasma displays
on page 59 for detailed instructions.
CONTROL
OUT
VIDEO
IN
OUT
P
R
CONTROL
COMPONENT
VIDEO OUT
S-VIDEO
OUT
P Y
B
VIDEO
SPEAKERS