Basic Playback Controls - Pioneer S-HTD340 Operating Instructions Manual

04 Getting started
2 Press OPEN/CLOSE to open the disc
tray.
3 Load a disc.
Load a disc with the label side facing up in the
front-most disc space, using the disc tray
guide to align the disc. (If you're loading a
double-sided DVD disc, load it with the side you
want to play face down.)
If you want to load more discs, press DISC SKIP
(remote or front panel) to rotate the disc tray.
You can load up to five discs at once.
• Do not place discs in the two partially
accessible disc spaces, as it easy to
misalign them. Use only the front-most
space.
• Do not load more than one disc in a space.
• Before loading or removing discs, always
wait for the disc mechanism to come to a
complete stop.
• Do not rotate the disc tray by hand. Always
use the DISC SKIP button.
• Sometimes, when the disc tray
mechanism is moving, the controls are
inoperative.
4 Press (remote) or
start playback of the disc loaded in the
front-most disc space.
Alternatively, use the DVD/CD or DISC buttons
on the remote, or the DIRECT PLAY buttons on
the front panel to start playback of other discs.
30
En
Disc number
(front panel) to
If you're playing a DVD or Video CD, a menu
may appear. See DVD-Video disc menus on
page 33 and Video CD PBC menus on page 34
for how to navigate these.
If you're playing an MP3, WMA or JPEG disc, it
may take a few seconds before playback starts,
depending on the complexity of the file
structure on the disc.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Viewing JPEG
discs on page 53 for more on playing these
discs.
• See also Options on page 65 if the disc
contains both WMA/MP3 audio files and
JPEG picture files.
5 Use the VOLUME +/– button (or the
front panel VOLUME knob) to adjust the
volume.

Basic playback controls

The following table shows the basic controls on
the remote for playing discs. You can find other
playback features in Playing discs on page 43.
FOLDER
ENTER
FOLDER
ENTER