Table of Contents
Advertisement
Setting a computer
image to the correct
RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example:
Setting
the "RGB SELECT"
mode to
"MOTION "
Press
the PROCEED
button
on the remote
control
to
display
the MAIN MENU
on the screen, then...
i. Use the •
and •
buttons
to select "OPTIONS",
then
press the PROCEED
button.
The "OPTIONS"
screen
appears.
2. Use 1he • and • buttons
to select "RGB SELECT".
3. To set the RGB select mode to "MOTION"
...
Use the • and • buttons
to select "MOTION".
The mode switches
as follows
each time the • or •
button
is pressed:
AUTO _-_STILL _-_MOTION _-_WIDE1 _-_ WIDE2 _-_DTV _-_
/
J
Information
• RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO .............. Select the suitable
mode for the
specifications
of input signals
as
listed in the table "Computer input
signals supported by this system" on
page 55.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION .......... The video
signal
(from
a scan
converter) will be converted to RGB
signals to make the picture
more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE] ............. When an 852 dot;< 480 line signal
with a horizontal
frequency
of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot;< 480 line signal
with a horizontal frequency of 31.0
kHz is input,
the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
DTV .................
Set this mode when watching digital
broadcasting (480P).
See page 55for the details of the above settings.
• Restoring the factory
default settings
Select "RESET" under the function menu. Note that
this also restores other settings lo the factory defaults.
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
37
Advertisement
Table of Contents
