Table of Contents
Advertisement
The 2nd line of the "WORKING
TIME":
[_ 0M _-> 3M <-+6M <-_9M <-_... _-> 57M _]
The 1st line of the "WAITING
TIME":
_=_0H <-_IH<-_2H <-_3H _-_.. <-_12H <_
The 2nd line of the "WAITING
TIME":
_=_0M +_ 3M +-_6M <-_9M _-_ .L <--_ 57M _]
6. Once the setting is completed...
Press the EXIT button several times lo return to the
main menu.
To delete the main menu, press the EXIT button once
more.
Setting
the time for "SCREEN
WIPER"
Set the "SCREEN WIPER" operation time, "WAITING
TIME", and "SPEED".
Example: Setting sothat the SCREEN WIPER mode
starts in 30 minutes and proceeds for one and a half
hours.
Pe_orm
Steps 1-2 on Page 32, then:
3. Use the • and • buttons to select "SCREEN
WIPER",
then use the • and _ buttons
to select "ON".
Information
• Setting the time
WORKING TIME
Set the length of time the "INVERSE/WT"
mode lasts.
When the WORKING
TIME is set to "ON", the
"INVERSE/WT"
mode stays in the on state,
WAITING TIME
Set the length of time until the "INVERSE/WT"
mode
starts.
* The "WORKING TIME" and "WAITING TIME" can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
• To select
"ON"
for the "WORKING
TIME"...
Set the hours of the WORKING
TIME
to OH and the
minutes
to 0M.
"ON" will be displayed.
4. Press the PROCEED
button.
The "SCREEN
WIPER"
screen appears.
5. Adjust the time and speed using the • and In"buttons
and the • and •
buttons.
The mode switches as follows each time the • and I_
button is pressed.
The i st line of the "WORKING
TIME":
_ ON or 0H <-_1H +_ 2H _-_3H <-_... _-_12H <--]
* The "WORKING
TIME"
(minutes)
and "WAITING
TIME" cannot
be set when the "WORKING
TIME"
is "ON".
34
Advertisement
Table of Contents
