Table of Contents
Advertisement
Setting the power management for computer images
This energy-saving
(power management) function
automatically reduces the monitor's power consumption
if no operation is performed for a certain amount of time.
Example: Turning the power management function on
Press
the PROCEED
button
on the remote
control
to
display
the MAIN MENU
on the screen, then...
i. Use the • and • buttons
to select "FUNCTION",
then
press the PROCEED
button,
The "FUNCTION"
screen appears,
2. Use the • and • buttons
to select "POWER
MGT",
3. To turn the power
management
function
on ...
Use the • and • buttons
to select "ON",
The mode switches
as follows
each time the • or •
button
is pressed:
ON _-_OFF
Information
• Power management function
* The power management function automatically reduces
the monitor's power consumption if the computer's
keyboard or mouse is not operated for a certain amount
of time. This function can be used when using the
monitor with a computer conforming to the VESA
DPMS format,
* If the computer's
power is not turned on or if the
computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions
on using the computer's
power
management function, refer to the computer's operating
instructions.
•
Power
management
settings
ON ...................
In this mode the power management
function
is turned on.
OFF .................
In this mode the power management
function
is turned off.
•
Power
management
function
and POWER/
STANDBY
indicator
The POWER/STANDBY
indicator
indicates
the status
of the power
management
function.
See page 30 for
indicator
status and description.
• Restoring the factory default settings
Select "RESET" under the function menu, Note that
this also restores other settings lo the factory defaults,
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
29
Advertisement
Table of Contents
