Setting
the color temperature
Use this procedure to set color tone produced by the plasma
display,
Example: Setting "1"
Press
the PROCEED
button
on the remote
control
to
display
the MAIN MENU
on the screen, then...
i. Use the •
and •
buttons
to select "PICTURE",
then
press the PROCEED
button,
The "PICTURE"
screen appears,
2. Use the • and • buttons
to select "COLOR
TEMR".
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
• Setting the color temperature
1 ...................... High (bluer)
2 ......................... Middle (Standard)
3 ......................
Low (redder)
•
Restoring
the factory
default
settings
Select "RESET"
under the function menu. Note that this
also restores other settings to the factory defaults.
3. Use the • and • buttons
to select "i",
The mode
switches
as follows
when
the •
and •
buttons
are pressed:
r 2 3 pn° 1
* See page 23 to set "PRO".
* If neither the • or • button is pressed within 5 seconds,
the current selection is set and the previous screen _appears.
22