Table of Contents
Advertisement
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image.
Example: Setting the "RGB SELECT" mode to
"MOTION "
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the
and
buttons to select "OPTIONS," then
press the PROCEED button.
The "OPTIONS" screen appears.
2. Use the
and
buttons to select "RGB SELECT."
O P T I O N S
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
SEL.
ADJ.
3. To set the RGB select mode to "MOTION" ...
Use the
and
buttons to select "MOTION."
The mode switches as follows each time the
button is pressed:
AUTO
STILL
MOTION
O P T I O N S
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
PICTURE SIZE
SEL.
ADJ.
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To close the main menu, press the EXIT button once
more.
: VIDEO1
: HD/DVD1
: RGB1
: RGB
:
AUTO
: 1080B
: ON
EXIT
RETURN
or
WIDE1
WIDE2
DTV
: VIDEO1
: HD/DVD1
: RGB1
: RGB
:
MOTION
: 1080B
: ON
EXIT
RETURN
Information
RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO .............. Automatically selects the suitable
mode for the specifications of input
signals as listed in the table
"Computer input signals supported by
this system" on page 45.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION .......... The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE1 ............. When an 852 dot
with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot
with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
DTV ................. Set this mode when watching digital
broadcasting (480P).
See page 45 for the details of the above settings.
Restoring the factory default settings
Select "RESET" under the function menu. Note that
this also restores other settings to the factory defaults.
41
480 line signal
480 line signal
Advertisement
Table of Contents
