Watching Computer Images With O Wide Screen; When "Picture Size" Is Set To "Off - Toshiba 50XP26H Owner's Manual

Watching computer images with a
wide screen
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen,
i, Press the WIDE button on the remote control
2, Within 3 seconds ...
Press the WIDE button again.
The screen size switches as follows:
NORMAL -_ FULL •
NORMAL size screen (4:3 or SXGA 5:4
FULL size screen
The image is expanded in the horizontal and vertical
direction.
When wide signals are input.
TRUE
The picture has the same size as the normal computer
image.
FULL size screen
The image is true resolution.
FULL
The image is expanded in the horizontal direction,
When wide signals are input.
FULL size screen
When "PICTURE SIZE" is set to "OFF"
The screen size switches as follows:
_-_ TRUE -_ FULL
/
TRUE size screen (VGA, SVGA 4:3)
Information
• Supported
resolution
See page 55 for details on the display output of the
various VESA signal standards supported by the
monitor.
• "PICTURE SIZE" setting
When the setting of "PICTURE SIZE" is OFF, the size
of RGB-inpat pictures will be TRUE in place of
NORMAL.
• When 852 (848) dot × 480 line wide VGA*
signals with a vertical frequency of 60 Hz and
horizontal frequency of 31.7 (31.0) kHz are in-
put
Select an appropriate setting for RGB SELECT mode
referring to the"Table of Signals Supported" on page
55.
* " IBM PC/AT" and "VGA" are registered trademarks
of IBM, Inc. of the United States.
The image is 1rue resolution.
15