Using Cableclear; Selecting The Color Temperature - Toshiba COLORSTREAM HD 26HLC56 Owner's Manual

Using CableClear®/DNR(digital noise
reduction)
The CableClear _ digital noise reduction feature allows you to
reduce visible interference in your monitor's picture. This may
be useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To turn on the CableClear/DNR settings:
SS MENU Pre.<_' O and open tile Picture
menu.
2 Highlight Picture
Settings
and press @.
3 Press • or • to highlight CableClear DNR
Color Temperature ;_i
4
Press • or • to select Low, Middle, High, or Auto.
To turn off CableClear DNR:
Select Off in step 4 above.
Note:
• The CableClea_ DNR feature works with 480i input sources
only.
• When the monitor is in ColorStream, HDMt or PC mode, the
words "CableClear DNR" will change to "DNR" in the menu.
Selecting the color temperature
You can change tile quality of the picture by selecting from
three preset color temperatures (Cool, Medium, and Warm), as
described below.
_iii_
Cool blueish
Medium neutral
Warm reddish
To select the color temperature:
SS MENU
Pre.<_' O and open tile Picture menu.
2 Highlight Picture
Settings
and press,@.
3
Press • or • to highligllt Color
Temperature.
Black Btrech
MPEG NR
CableClear DNR
;lIEgE,' ,'N, LU_E,',x,_
4
Press • or• to select tile mode you prefer, as described in
the table above.
Note: tf you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature, the picture mode automatically changes to
Preference in the Picture menu.
31