Special Set - Hitachi HV-D25 Operation Manual

3-ccd color camera

Hide thumbs Also See for HV-D25:

Table of Contents

6. SPECIAL SET

1) REMOTE: Remote control baud rate setting

For baud rate setting, use the L and R buttons.

(Note) When setting a baud rate, do not connect the communication cable with the REMOTE terminal.

6 2 5 0 0 b p s

62500bps: Select this baud rate when using the RC-C10 remote control box. In this case, be sure to also set

the RC-C10 baud rate to 62500 bps. Refer to the RC-C10 operating instructions.

19200bps, 9600bps, 4800bps: Select any one of these baud rates when controlling the camera from a

personal computer through RS-232C interfacing. For details, refer to 'Function Selection by Internal Switch

Setting'. Contact us for details of the control procedure using a personal computer. Technical documents

including protocol data will be supplied.

2) LENS: Change to LENS menu.

3) IRIS GATE: Change to IRIS GATE menu.

4) WHITE GATE: Change to WHITE GATE menu.

5) LEVEL: Change to LEVEL menu.

6) MASKING: Change to Masking menu.

7) OUTPUT/SYNC: Change to OUTPUT/SYNC menu.

8) ID/TITLE: Change to ID/TITLE menu.

9) DTL: Change to DTL menu.

10) GAMMA: Change to GAMMA menu.

L L

4 8 0 0 b p s

9 6 0 0 b p s

R R

1 9 2 0 0 b p s

Table of Contents