To adjust the focus automatically
Follow steps 1 and 2, then touch [AUTO] in step
3. Or press FOCUS
after step 4.
0
Note
• You cannot use the SPOT FOCUS
flmction together
with [PROGRAM
AE].
• Focusing
distance
information
will not be displayed.
You can adjust the focus manually
according
to the recording
conditions.
Use this function
in the following
cases.
To record a sut_iect behind a window covered
with raindrops.
To record horizontal
stripes.
To record a subject with little contrast
between
the subject and its background.
When you want to l_cus on a subject in the
background.
To record a stationary
subject using a tripod.
Focus ring
%
FOCUS
Press
FOCUS
during
recording
or ill
the standby
mode.
appears.
Rotate
the focus ring
and adjust
the
focus.
E:_changesto
_whenthel_cuscannotbe
adiusted
any lhrther.
_
changes
to *_
when the focus cannot be adjusted an?:
closer.
Tips for focusing
manually
• It is easier to focus on the subject
when you use the
zoom fimction
Move the powe! zoom leve! towards
T (telephoto)
to adjust the focus, and then, towards
W (wide angle) to adjust the zoom for recording.
• When you want to record a close-up
image of a
subject, move the power zoom leve! towards
W
(wide angle) to fiflly magni_'
the image, then adjust
the focus
To use the expanded focus _
For DCR-H(
85:
It will be easier to confirm the focus setting by
_._-
enlarging
the image during manual focusing.
€._
When the CAMERA-MEMORY
lamp is on, set
[EXP.FOCUS]
in the f_i_ (CAMERA
SET)
menu to [ON] (p. 66).
When you rotate the focus ring, @
appears
and the image will be displayed
at twice its
original size.
To adjust the focus automatically
Press FOCUS
again.
"_° Tip
The t)cal
distance information
(for when it is
dark and hard to adjust focus) appears tBr 3
seconds in the following
cases. (It will not be
displayed
correctly if you are using a
conversion
lens (optional).)
When the tbcus mode is switched from automatic
to
lnanllal.
When you rotate the tbcus ring.
Recording 41