Searching For A Scene By Date Of Recording - Date Search - Sony Handycam DCR-HC85 Operation Manual

the Remote Commander to select a
title that you want to play.
Playback starts automatically from the
selected title.
ptayback starts
To cancel theoperation
Press STOP on the Remote Commander.
{J Note
• You catmot use Title search when [ _ SEARCH] is
set to [OFF] on file
(EDIT,'PLAY) menu (it is
set to [ON] by default) (p. 81)
• The Title search will not fimction conectly when
there is a blank section between recorded sections on
the tape.
When you are using a cassette with Cassette
Memory, you can locate a scene by the
recording date ([_ SEARCH] is set to [ON]
by default). When you are using a cassette
that does not have Cassette Memory, you can
locate the point where the recording date
changes.
Q!c3v_
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
Press SEARCH M. on the Remote
Commander repeatedly to select
[DATE SEARCHI.
Press _ (previous)!l_l_l (next) on
the Remote Commander to select a
recording date.
When your cassette has Cassette Memory,
you can select the recording date itself.
When your cassette does not have Cassette
Memory, you can select the previous or the
next date of the present point on the tape.
Playback starts automatically from the
point where the date changes.
Screen example
(when the cassette has Cassette Memory):
playback starts
To cancel the operation
Press STOP on the Remote Commander.
{J Note
• If one day's recording is less than 2 minutes, yore
camcorder may not accurately find the point where
the recording date changes.
• The Date search will not flmction conectly when
the_e is a blank section between recorded sections on
the tape
• You can record date/time data tbr up to 6 days
When you have recorded for more titan 7 days on a
tape, locate the date without using the Cassette
Memm T. To ttm_ off the Cassette MemolT, select
the _{:Yi (EDIT/PLAY) menu, [ _ SEARCH],
and then [OFF] (p. 8t)
/
-0
Playback 61