Sony Handycam DCR-HC85 Operation Manual page 86

0 Note
• V_Then you connect your camcordel to olttside powe! soluces [BRIGHT] is autonlatically
selected t%rthe setting.
• When you select [BRIGHT], batte D' life is reduced by about 10 percent during recording.
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on vo_.lr camcorder.
DOFF Select when not using the Digital conve_t fimction.
ON (_) To output analog images and sound in digital t%rmat using your
camcorder.
The analog signal input to the AUDIO/VIDEO jack of yore camcorder
will be convezted and output from the _, DV Interface of your
camcorder.
For details, refer to the "Computer Applications Guide"
When you connect your camcorder to another device using the supplied AV
connecting cable, set the type of plug you are going to use for the connection.
t>VIDEO Select to input a video signal
S VIDEO Select to input an S video signal
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming).
For details refer to the "Computer Applications Guide."
_>OFF Select to deactivate the USB Streaming fimction
USB STREAM
Select to activate the USB Streaming fimction.
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or "Memory Stick Duo" in your camcorder on your computer. For
details, refer to the "Computer Applications Guide."
_>STD-USB Select to view the picia_reon the "Memory Stick Duo."
PictBddge
Select to connect the PictBridge compliant printer (p 110).
USB STREAM Select to view the picture on the tape
86 Using the Menu