Sony Handycam DCR-HC85 Operation Manual page 30

until the CAMERA-MEMORY lamp
lights up.
The selected recording tblder is displayed.
Stide the POWER
switch while pressing
the green button.
Press and hold PHOTO lightly.
You will hear a light beeping sound when
the focus and brightness settings are
adjusted. Recording does not start at this
point.
The indicator
stops flashing
The number of images
that can be recorded*
*Tile number of images that can be iecoided
varies depending on the image quality setting
and the recoiding environment.
A shutter sound is heard. When bars of
llll _ disappear, the image is recorded on
the "Memory Stick Duo."
To checkthe most recentlyrecorded
image - Review
Touch _.
Touch E_[] to retnrn to standby.
To delete the image, touch [3D, then [YES].
To cancel deleting, touch [NO].
To turn the power off
Slide the POWER switch up to the OFF ((HG)
position.
To record still images continuously-
Burst
Select the (MEMORY SET) menu,
[STILL SET], then [_
BURST] ( p.7O).
You can record images continuously in a time
interval of about 0.5 to 0.07 seconds.
Indicatorsdisplayedduringrecording
% %
[] Recording folder
[] Image size
For DCR-H( 65:
[_152 (1152 x 864) or L_640 (640 x 480)
For DCR-HC85:
I_7eoo(1600 x 1200)or _4o (640 x 480)
[] Quality
FINE
([FINE]) or
STD
([STANDARD])
[] Personal Menu button (p. 62)
[] Review button (p. 30)
"_° Tip
• When you p_ess PHOTO on your Remote
Commander, the image displayed on the screen at
that timing is recorded
• The recording time, date, and the camera settings
data are recorded automatically on the recording
media without being displayed on the screen. You
can view this infommtion dm-ing playback by
selecting [DATA CODE] in the menu setting
(p. 57).
• The recording angle is wider than that of the
CAMERA-TAPE mode.
30 Recording