Sony Handycam DCR-HC85 Operation Manual page 104

To end Digital programediting
Touch [END].
To save a programwithout usingit to
record
Touch [END] in step 11.
The program is stored in memory until the
cassette is ejected.
To erase programs
1
Follow steps 1 to 6 ill "Recording the
selected scenes as programs" (p. 102),
then touch [[ NDO].
2 Touch [DEL 1MARK] to delete the last
set program. Or, touch [ALL ERASE] to
erase all the programs.
3 Touch [EXEC].
The programs are deleted
To cancel this operation, touch [( ANCEL].
0 Note
• You cannot set stinting point o! ending point on a
blatlk section of the tape. If there is a blatflc section
m the pictme set as a program, the total time may not
appear conecdy.
• When you cannot operate the device conectly using
an iLINK cable connection, select [IR] in step 11 on
p. 99, and set the [IR SETUP] code
104 Dubbing/Editing