Heat & Glo LUX60 Owner's Manual page 24

1-1/2 in.
(38 mm)
Combustible flooring may be installed
next to the front of the appliance.
Note: The appliance MUST be installed on a minimum
6 in. (152 mm) high platform to accommodate the front
face.
Steel Stud
Assembly
36 in.
(914 mm)
Figure 5.3 Clearances to Combustibles
24
1-1/2 in.
(38 mm)
1-1/2 in.
(38 mm)
Drywall
0 in.
42 5/8 in. (1083 mm)
fireplace opening
to ceiling
0 in.
Heat & Glo • LUX60 • 4062-116 • Rev. G • 4/11
52 in.
(1321 mm)
* If the inside of the chase is to be finished, add the
thickness of the finish material to this dimension.
IMPORTANT NOTICE! When setting this
appliance, you MUST consider what type of wall
fi nishing will be used. Refer to Section 14.
10 in.
(254 mm)
minimum
30.5 in. (775 mm) *
minimum
rough opening
depth
86 in.
2184 mm)
6 in.
(152 mm)
minimum