Hayter Clipper 46 401R Owner's Handbook Manual page 38

1.37
FAULT FINDING
PROBLEM
Uneven cut
Mower is hard to push
Mower will not self propel
Poor mulching performance
FAULT FINDING
Continued.
POSSIBLE FAULT
Grass is wet
Undulating ground conditions Change direction of travel
Cutterbar worn
Cutterbar out of balance
Wheels damaged
Cut height too low
Wheels damaged
Clutch out of adjustment
Drive belt damage
Underside of deck is dirty
Height of cut set too low
Cutterbar worn
Grass is wet
REMEDY
Mow dry grass
Sharpen the cutterbar
Balance the cutterbar
Inspect and replace as necessary
Increase cut height
Inspect and replace
as necessary
Adjust clutch
Replace drive belt
Clean underdeck
Increase height of cut
Sharpen the cutterbar
Mow dry grass
401001EB100398A
1.37