Pioneer PDP-505HD Operating Instructions Manual page 49

CLkGLJ_(_J
_EEN
-- Mode switch
/
SAT control buttons
CABLE and SA] cannot be selected at the same time,
When SAT is preset by "Remote code set up", the
lemote control unit buttons will fiJnction as shown below,
• When a satellite broadcast tune_ is connected to this
unit, p_ess the input selector button that has the same
number as the connected input terminal and set the
mode switch to CBL/SAT The tuner can be operated
using buttons (1" to _8}
• Satellite broadcast tuners which are made by other
makers and a_e not p_eset can also be operated with
the remote control unit if buttons q) to "8" have learnt
the functions (page 41)
(1) Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch,
{2}' CH (Channel) +, - buttons
Press plus (+) or minus (-) to tune in a higher or lower
channel,
3 _SOURCE POWER button
Turns the power of the SAT (digital satellite system
tunel) on and off
_4) Select/Set buttons (SET/SELECT, <, 1_, A, v)
4, 1_, A, V: Pless the button to select items on the
SAT GUIDE seleen ol SA] menu seleen
SET/SELECT; P_ess to activate the selected function,
tb) CH ENTER button
Fix the selected channel with the direct channel
selection buttons,
• This button is not preset, Use this button to learn if
necessary,
_ SAT MENU button
When this button is pressed, the satellite broadcasting
menu will be displayed
_' SAT GUIDE button
When this button is p_essed, the satellite broadcasting
guide screen will be displayed
_9 (SAT) INFO button*
When this button is p_essed, information on satellite
broadcasting will be displayed
* (SAT) INFO button has no remote control signals preset Learn
the operation if necessary