Connection To Input3 And Input4 - Pioneer PDP-505HD Operating Instructions Manual

Connection te INPUT3 and NPUT4
Various components can be connected to the INPUT3 and
INPUT4jacks After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component, Please see pages 17 to 19 for
on-screen setup after connection
NPUT3
jack VD
3utput source_
Video cornponenb
)orsonal
computer (PC)
with RGBoutput
VD
Video component
with component
video output Y (CB/%) (Cr#P,/)
: Do not connect anything. O : Connect to thisjack.
Note
Cornponer/ts compatible with INPUT3are also compatible with
INPUT 4
When making connections to INPUT4, please refer to
supplement 3 on page 57
]
INPUT3 and INPUT4 are compatible with, please
refer to supplements 1 and 2 (pages 55 and 56),
[ON SYNCl [H/V SYNC]
G B R HD
y CB/PB CR/PR
G ON SYNC B R
G B R HN SYNC
G B R HD
Connection to AV components
Make component video connections for AV components
with component video output capability,
When connecting to INPUT3
@@0 ...........
y c_p_ c_/p_
(ON SYNC) INPUT_ _
On-screen setup is necessary after connection,
Please see pages 17 and 18,
INPUT3jacks are all BNCjacks
If necessary, use Pin/BNC conversion adapters to make
connections
When connecting to INPUT4
On-screen setup is necessary after connection,
Please see pages 17 and 18,