Pioneer PDP-505HD Operating Instructions Manual page 25

To create a still image of the video To confirm display settings
image on the screen
0
QJ GU<Z)_
--STILL
SCRE_
q) q)
--DISPLAY
Press STILL on the remote control unit.
The image culrently being viewed is preselved on the
screen This flJnction is convenient for viewing things on
the screen that would no_mally be clea_ed before the_e
was ample time to view it (recipes in a cooking p_og_am
for example)
Pressing STILL again returns to unit to normal display of
the input source
INPUT4
PC RGB
FH: 480kHZ
FV; 600 HZ
STD
FULL
Notes
• Though the video image on the screen is frozen, the video
signal is not paused
• Normal display of the video input source is restored after 3
minutes even if STILl has not been pressed again
Press DISPLAY on the remote control unit.
The cunently selected input, vertical and horizontal
flequencies, PICTURE mode, screen size, AUTO SCREEN
setting, and input signal format are displayed on the
screen for approximately 3 seconds,
Notes
• The vertical and horizontal frequencies are displayed only
when INPUT3 or INPUT4 is selected to receive an RGB signal
When receiving a component video signal only the horizontal
frequency is displayed,
• The vertical and horizontal frequencies that are displayed are
approximatiOnSr and may be slightly different from the actual
values