Advertisement
Assembly
requires two persons.
Place aJl parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials untiJ assembly is completed.
AssembJy requires
the included
toots and your own adjustable
wrench
_
and Phillips
screw-
driver _L:]
...........................
-w
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LEST on page 21. The second number is the quantity
needed for assembJy. Note: Some small parts may have been 9reoattached.
tf a part is not in the parts
bag, check to see if it has been 9reoattached.
I
M6 Washer
(75)-10
M4 x 16mm
M8 SpJit
M4 x 12mm
Round Head
Washer(55)-14
Screw(85)-1
Screw (80)-6
M6 x 16mm Button
Screw (81)-4
M6 x 28mm Button
Screw (67)-6
M6 x 30mm Button
Screw (37)-4
M8 x 16mm Button
M8 x 19mm Button
Screw (54)-6
Screw (77)-4
M8 x 50mm Button
Screw (52)-4
MIO x 63mm BoJt Set (62)-1
Orient the Left Front Stabilizer (15) with the Wheel (17)
positioned as shown. Attach the Left Front Stabilizer to
the left side of the Frame (1) with three M8 x 16mm
Button Screws (54) and three M8 Split Washers (55).
Attach the Right Front Stabilizer
(not shown) to the
right side of the Frame (1) in the same way.
17
15
Advertisement
