Part Identification Chart - NordicTrack E14.5 831.23924.0 User Manual

PART iDENTiFiCATiON CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Locknut
(102)-4
#8 x 1/2"
Screw (124)-4
M8 Star
Washer (122)-4
0
#8 x 3/4"
Screw (123)-11
Wave Washer
(95)-2
M8 x 35mm
Bolt (96)-4
M6 x 12mm
Screw (121 )-10
M8 x 16mm
Screw (120)-6
MIO x 75mm Screw
(119)-2
M10 x 90mm
Screw (84)-2
H
M8 x 25mm
Washer (98)-6
M8 x 19mm
Screw (82)-4
5