Advertisement
PART IDENTIFICATION
CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware
kit, check to see if it
has been preassembled.
Extra parts may be included.
M5 Washer
(94)-2
M4 x 16mm
Screw (101)-16
M10 x 25mm
Screw (99)-4
M8 Washer
(97)-8
M8 x 13mm
Screw (82)-8
M10 Split
Washer (105)-8
M8 x 38mm
Bolt (96)-4
16mm Wave
Washer (54)-2
M8 Locknut
(102)-4
M10 x 122mm
Screw (104)-4
5
Advertisement
