Table of Contents
Advertisement
www.nordictrack.com
Model No. NTEL01112.0
USER’'S MANUAL
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to www.nordictrackservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Advertisement
Table of Contents
Troubleshooting
Related Manuals for NordicTrack E 9.9 Elliptical
Summary of Contents for NordicTrack E 9.9 Elliptical
- Page 1 Model No. NTEL01112.0 USER’’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.nordictrackservice.com/ registration. CUSTOMER CARE For service at any time, go to www.nordictrackservice.com.
-
Page 2: Table Of Contents
If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 5 STANDARD SERVICE PLANS...
-
Page 6: Before You Begin
NORDICTRACK ® E 9.9 elliptical. The E 9.9 elliptical manual. To help us assist you, note the product model provides an impressive selection of features designed number and serial number before contacting us. The... -
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. - Page 8 ASSEMBLY •• Assembly requires two persons. •• In addition to the included tool(s), assembly requires the following tools: •• Place all parts in a cleared area and remove the one Phillips screwdriver packing materials. Do not dispose of the packing materials until you ...
- Page 9 2. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1). Have the second per- son hold the Frame to prevent it from tipping while you complete this step. Attach the Front Stabilizer (6) to the Frame (1) with two M10 x 122mm Screws (104) and two M10 Split Washers (105).
- Page 10 4. Press the Cover Mounts (106) on the underside of the Rear Stabilizer Cover (15) into the Rear Stabilizer (2). 5. Tip: Avoid pinching the wires. Avoid damag- ing the indicated plastic tabs. Set the Upright (4) on the Frame (1). Avoid pinching the wires and avoid Attach the Upright (4) with four M10 x 25mm...
- Page 11 6. See the inset drawing. Locate the wire tie in the lower end of the Upright (4). Tie the wire tie to Wire Tie the Upper Wire (110) and to the Fan Extension Wire (146). Then, pull the upper end of the wire tie until the Upper Wire and the Fan Extension Wire are routed through the Upright.
- Page 12 8. Identify the Right Upper Body Arm (61) and ori- ent it as shown. Slide the Right Upper Body Arm (61) onto the Right Upper Body Leg (60). Attach the Right Upper Body Arm (61) with two M8 x 38mm Bolts (96) and two M8 Locknuts (102).
- Page 13 10. Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (101). Avoid pinching the wires 11. Orient the Right Pedal Arm (58) assembly as shown. Apply grease to the axle on the Right Pedal Arm (58).
- Page 14 12. Apply grease to a Pedal Arm Axle (64). Next, slide an M8 Washer (97) and an Axle Spacer (77) onto an M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). While a second person holds the front end of the Right Pedal Arm (58) inside the bracket on the Right Upper Body Leg (60), insert the Pedal Arm...
- Page 15 14. Orient the Shield Cover Cap (118) as shown. Attach the Shield Cover Cap (118) around the Upright (4) by pressing it into the Shield Cover (75). 15. Orient the Rear Console Cover (80) as shown. Attach the Rear Console Cover (80) to the Upright (4) with two M4 x 16mm Screws (101).
- Page 16 16. Orient the Rear Upright Cover (81) as shown. Attach the Rear Upright Cover (81) to the Upright (4) with four M4 x 16mm Screws (101). Orient the Front Upright Cover (117) as shown. Attach the Front Upright Cover (117) around the Upright (4) by pressing it into the Rear Upright Cover (81).
- Page 17 18. Identify the Right Upper Body Leg Inner Cover (83) and orient it as shown. Attach the Right Upper Body Leg Inner Cover (83) to the Right Upper Body Leg (60) with an M4 x 16mm Screw (101) and an M5 Washer (94).
-
Page 18: The Chest Heart Rate Monitor
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR •• Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it to The heart rate temperatures above 122° F (50° C) or below 14° F monitor consists of (-10°... -
Page 19: How To Use The Elliptical
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may 2-pole Receptacle This product must be grounded. If it should malfunc- be used to tion or break down, grounding provides a path of least connect the Adapter resistance for electric current to reduce the risk of... - Page 20 HOW TO MOVE THE ELLIPTICAL HOW TO ADJUST THE POSITIONS OF THE PEDALS Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, Each pedal can be adjusted to several positions. To hold the upright, and place one foot against one of the adjust each pedal, simply pull the pedal handle out- wheels.
- Page 21 HOW TO EXERCISE ON THE ELLIPTICAL To dismount the elliptical, wait until the pedals come to a complete stop. Note: The elliptical does not have To mount the elliptical, hold the handlebars or the a free wheel; the pedals will continue to move until upper body arms and step onto the pedal that is in the the flywheel stops.
- Page 22 CONSOLE DIAGRAM MAKE YOUR FITNESS GOALS A REALITY WITH IFIT.COM Upload your workout results to the iFit cloud and track your accomplishments. With your new iFit-compatible fitness equipment, you can use an array of features on iFit.com to make your Set calorie, time, or distance goals for your fitness goals a reality: workouts.
- Page 23 FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The advanced console offers an array of features IMPORTANT: If the elliptical has been exposed to designed to make your workouts more effective and cold temperatures, allow it to warm to room tem- enjoyable.
- Page 24 HOW TO SET UP THE CONSOLE HOW TO USE THE MANUAL MODE Before using the elliptical for the first time, set up the 1. Begin pedaling or press any button on the console. console to turn on the console. 1. Create an iFit account. See HOW TO TURN ON THE POWER on page 23.
- Page 25 4. Follow your progress with the display. Time——When the manual mode is selected, this display mode will show the elapsed time. The display can show the following workout information: The matrix offers several display tabs. Press the Display button repeatedly until the desired tab is shown.
- Page 26 When a wireless iFit When your pulse is detected, one or two dashes module is connected, the will appear, and then your heart rate will be shown. wireless symbol at the top For the most accurate heart rate reading, hold of the display will show the contacts for at least 15 seconds.
- Page 27 HOW TO USE AN ONBOARD WORKOUT As you exercise, you will be prompted to keep your pedaling speed near the target rpm for the cur- 1. Begin pedaling or press any button on the rent segment. When an upward-pointing arrow console to turn on the console.
- Page 28 HOW TO USE A SET-A-GOAL WORKOUT Note: The calorie goal is an estimate of the number of calories that you will burn during 1. Begin pedaling or press any button on the the workout. The actual number of calories that console to turn on the console.
- Page 29 HOW TO USE AN IFIT WORKOUT will burn during the workout and a profile of the resistance settings of the workout. Note: To use an iFit workout, the console must be con- nected to a wireless network (see page 30). An iFit Note: The calorie goal is an estimate of the account is also required (see step 1 on page 24).
- Page 30 HOW TO CHANGE CONSOLE SETTINGS Firmware Update——For the best results, regularly check for firmware updates. The console features a settings mode that allows you to view usage information, to personalize console set- Note: The matrix will display NOT CONNECTED if tings, and to set up and manage a wireless network the console is not connected to a wireless network.
- Page 31 Clear WiFi——To erase the console’’s wireless the caps option, the number option, or the symbol network settings and have it forget the currently option. selected wireless network, follow the instructions in the matrix. Press the up, down, left, and right buttons to high- light the desired letter or number.
- Page 32 Then, cycle the power of the elliptical: press the computer, smart phone, tablet, or other Wi-Fi power switch on the elliptical to the off position, device. Next, type in the IP address on the con- wait for several seconds, and then press the power sole into the URL bar in your browser.
-
Page 33: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING I nspect and tighten all parts of the elliptical regularly. HOW TO CALIBRATE THE RAMP Replace any worn parts immediately. If the ramp is not functioning properly, the ramp may To clean the elliptical, use a damp cloth and a small need to be calibrated. -
Page 34: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 35: Part List
PART LIST Model No. NTEL01112.0 R0113A Key No. Qty. Description Key No. Qty. Description Frame Roller Rear Stabilizer Right Grip Ramp Large Axle Cover Upright 16mm Wave Washer M4 x 19mm Screw Small Axle Cover Front Stabilizer Roller Arm Bushing Console Arm Bearing Left Handlebar... - Page 36 Key No. Qty. Description Key No. Qty. Description M4 x 16mm Screw Left Pedal Handle M8 Locknut Pedal Pin M6 x 12mm Screw Pedal Spring M10 x 122mm Screw M10 x 140mm Bolt M10 Split Washer M6 Acorn Nut Cover Mount Fan Grill M4 x 48mm Screw Fan Bracket...
-
Page 37: Exploded Drawing
EXPLODED DRAWING A Model No. NTEL01112.0 R0113A... - Page 38 EXPLODED DRAWING B Model No. NTEL01112.0 R0113A...
- Page 39 EXPLODED DRAWING C Model No. NTEL01112.0 R0113A...
- Page 40 ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...