9.
9
Tip: Avoid pinching
the wires. Attach the
Console (7) to the Upright (4) with four M4 x
16mm Screws (101).
101
Avoid pinching
the wires
101
10. Orient the Right Pedal Arm (58) assembly as
shown.
Apply grease to the axle on the Right Pedal
Arm (58).
Attach the Right Pedal Arm (58) to the Right
Roller Arm (59) with an M8 x 13mm Screw
(82), a Small Axle Cover (55), and an M8
Washer (97). Tip: Avoid damaging
the Small
Axle Cover when tightening
the Screw.
Repeat this step for the Left Pedal Arm
assembly (not shown).
10
82
55
59
_rease
58
10