Magic Chef CGB3740ADH Owner's Manual page 6

Press this pad
to cancel all
operations
except the
TIMER. The
time of day will
reappear in the
display.
Select models will not feature broiling.
Oven on
Preheat
Lock
Press or press
and hold these
pads to enter
time, oven
temperature or
to select HI or
LO broil.
Function pads are the BAKE, BROIL, SELF-CLEAN,
TIMER, CLOCK, COOK TIME, STOP TIME, and
CANCEL pads. A beep will sound when these pads
are pressed.
I
No beep will sound when the • or V pad is pressed.
All function pads except the CANCEL
pad feature an indicator light.
When the BAKE or BROIL pad is
pressed, the fndicator light will /_
turn on to let you know that the
oven is set for this operation.
Indicator lights on SELF-CLEAN, TIMER,
CLOCK, COOK TIME and STOP TIME pads will
flash when the pad is pressed. These indicator lights
will stop flashing but will remain tit once the function
starts.
! ii i i!i iiiiiiiiiiiiiiii!iii ! iii iiiiiiiiii iiii iiii
1. Press CLOCK pad.
2. Press or press and hold
• or _' pad until correct
time of day appears in
display.
then {_]
Display will flash when power is supplied to unit.
Press CLOCK pad to recall time of day when another
function is displayed.
Clock time cannot be changed if oven is set for timed
bake or delayed clean operation. Cancel the operation
before setting the clock.
If timer is in use, press CLOCK pad once to recall the
time of day or twice to reset the time of day.
If an indicator light on a function pad is lit and you set
a second operation:
- Either the control will not accept the operation or
- The indicator light on the first pad will "dim" slightly
and the indicator light on the pad you just pressed
will be "full on." This lets you know that you have
set the control for two operations.
If you prefer that the time of day is not displayed:
1. Press and hold both I_
CLOCK and CANCEL
pads for 3 seconds, and
When clock display is
disabled, press CLOCK pad to recall time of day for 4
seconds. Display will then blank.
If a power failure occurs when the clock has been
disabled, the display remains blank and will not flash
when power is restored.
Repeat step 1 to reactivate clock feature.