Magic Chef CGB3740ADH Owner's Manual page 21

o*
liiiiiiiiiiiiiiiiiiiiiiiiil ii!iii!iiiil !!iiilii !il ii i ii!iiiiiiiiiiiiiiiiiiiii!i!iiiii [ iiii iii ii!i!i!iii!ii !i! iliii! i !i! !!! iii! iiiil iii i iiiiiii ii!
BEFORE CLEAN CYCLE
• Remove pans, broiler pan, and
oven racks. Racks may discolor
and not slide easily after cleaning.
• Clean window, oven frame and
door frame. These areas are not
exposed to cleaning temperatures;
soil may bake on during clean
cycle.
° To prevent damage, do not clean •
gasket located on oven door.
Gasket seals in heat during the
clean cycle.
• To prevent excessive smoke or
flare-ups, wipe up excess grease
or spiltovers from oven bottom.
• Porcelain is acid resistant, not •
acid proof and may discolor during
the clean cycle. To prevent or
reduce discoloration, wipe up
sugar or acid spills (lemon, milk,
barbecue sauce, cheese).
DURING CLEAN CYCLE
As oven heats, the LOCK indicator
will tight in the display. At this
point, the door can not be
unlocked and opened.
To prevent damage to door or lock
lever, do not force door open
when the LOCK indicator is
displayed.
Some smoke and odor may be
detected the first few times the
oven is cleaned, This is normal
and will lessen in time.
• Smoke may occur if oven is
heavily soiled or if broiler pan was
left in oven.
As oven heats, you may hear
sounds of metal parts expanding
and contracting. This is normal
and will not damage oven,
AFTER CLEAN CYCLE
• The LOCK indicator will turn off
about one hour after clean cycle
ends. The door can be unlocked
and opened. Use care as oven
may still be hot.
• A gray powdery ash may remain
on the oven bottom or walls. This
is normal. Use a damp cloth to
remove ash.
• If soil remains, the clean cycle
may not have been long enough.
° Wipe oven racks with a small
amount of vegetable oil if racks do
not slide easily after clean cycle.
• Clean around oven vent opening if
there is a deposit from the fumes
vented during cleaning.
• Fine lines may appear in the
porcelain. This is normal and
results from the heating and
cooling of the finish. This will not
affect oven performance.
• A white discoloration may appear
after cleaning if acid soils (milk,
tomato, lemon, etc.) or sugary
soils were not wiped up before the
clean cycle. This discoloration is
normal and will not affect the
performance of the clean cycle.