Please Read The Following Carefully - Chicago Electric 91852 Assembly And Operating Instructions Manual

3. Daily: With a soft brush, cloth, or vacuum, remove all dust and debris from the
Miter Saw. Then, use a premium quality, lightweight machine oil to lubricate all
moving parts except the Saw Blade (4).
4. To replace the Motor Carbon Brushes: It may become necessary at sometime
to replace the two Carbon Brushes (26) when the Motor performance decreases,
or stops working completely. The Carbon Brushes are located on each side
of the Motor Housing (31). To do so, remove the two Brush Holder Caps (23).
Then, remove the two Carbon Brushes from the Brush Holders (25). If the Car-
bon Brushes are worn down more than 1/2, replace both Carbon Brushes. If,
however, the Carbon Brushes are just dirty they may be cleaned by rubbing them
with a pencil eraser. When installing the Carbon Brushes, make sure the carbon
portion of the Carbon Brushes contact the Motor Armature, and that the springs
face away from the Motor. Also, make sure the springs operate freely. After
cleaning or replacement, replace the Brush Holders.
NOTE: New Carbon Brushes tend to arc or spark when first used until they
wear and conform to the Motor's Armature. (See Assy. Diagram.)
5. NOTE: With the exceptions of Steps #1, #2, #3, and #4 all other mainte-
nance and servicing should be performed only by a qualified service tech-
nician.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
For technical questions, please call 1-800-444-3353.
SKU 91852 PAGE 22