Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Chicago Electric 04042 Assembly And Operating Instructions Manual

Brought to You by Augusta Flint

INSPECTION, MAINTENANCE, AND CLEANING

1. WARNING! Always turn the Power Switch (part #45) to its "OFF" position,
and unplug the Power Cord (part #53) from its' electrical outlet before performing
any inspection, maintenance, or cleaning.
2. BEFORE EACH USE, inspect the general condition of the Circular Saw. Check
for loose screws, misalignment or binding of moving parts, cracked or broken
parts, damaged Saw Blade (part #68), damaged electrical Power Cord
(part #53), and any other condition that may affect its safe operation. If abnormal
noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
3. DAILY: The Saw Blade (part #68) must be sharp and clean to perform properly.
Depending on materials cut and frequency of tool use, the Saw Blade may be-
come clogged with wood particles and dull. Dull Saw Blades rub the workpiece
rather than cut, which results in increased friction, higher temperatures, and a
burned workpiece. As often as possible, check the condition of the Saw Blade
and, if necessary, replace a worn Saw Blade with a new, 7-1/4" diameter Saw
Blade rated at 6,000 RPM or above. (See "To Remove And Install A Saw
Blade" section for further information.)
4. DAILY: With a soft brush, cloth, or vacuum, remove all sawdust and debris from
the Circular Saw. Do not immerse the Circular Saw in liquid.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
SKU 04042 PAGE 18