GE GTH18DCDBRBB Owner's Manual And Installation Instructions page 18

Installation Instructions
REVERSING THE DOOR SWING
(CONT.)
[] TRANSFER FREEZERDOOR HANDLE
TO THE RIGHT (CONT.}
Stainless steel handle (on
some models):
O Attach the handle to the
fastener and tighten with
the 3/32" Allen wrench
(supplied),
0 Line up the handle _ ,_
with the screw holes in the
9
bottom of the door and
tighten the screws,
1--9-1 RE-HANG THE REFRIGERATOR DOOR
Lower the refrigerator door onto the bottom hinge pin,
8
Plastic
Washer
Straighten the door and line it up with the center hinge
bracket,
Reinstall the center hinge pin with a 3/8" socket,
Turn it until it extends through the hinge bracket
and into the door,
I
PlasticWasher _
Hinge Pin----e_l_
!
Ft
Center Hinge __l_
Bracket l
I
Refrigerator Door
ITO] R E-HANG THE FREEZER DOOR
Lower the freezer door onto the center hinge pin,
Be sure the washer is in place,
_ h Center Hinge Pin
Plastic Washer_
Lift the top hinge so the pin fits into the door socket,
Support the door on the handle side and make sure the
door is straight and the gap between the doors is even
across the front, While holding the door in place, tighten
the top hinge screws,
18