GE GTH18DCDBRBB Owner's Manual And Installation Instructions page 17

Installation Instructions
_] TRANSFERREFRIGERATOR DOOR
HANDLE TO THE RIGHT (CONT.)
O
Transfer the door plug
button to the opposite side,
Reinstalling the handle:
Attach the handle to the
right side of the door,
Plastic handle:
O Line up the handle with the screw __._.
holes in the top of the door and _,_._"_
tighten the screws, I / [ I
e Insta, the screw into t he bottom of t he / / I I
handle, \ _ ] [
0 Reinstall the handle plug, ll_[ [
Handle
I I
Stainless steel handle
(on some models):
O Attach the handle to
the fastener and
tighten with the
3/32" Allen wrench
(supplied),
O Line up the handle
with the screw holes
in the top of the
door and tighten the
screws,
J
_-I TRANSFER FREEZER DOOR HANDLE
TO THE RIGHT
O Remove the screws
holding the handle to _i
the top and bottom of I "< ph,'N
the door,
L _
O Remove handle,
O Move the plug button on
the right side of the door
to the handle screw hole
on the left side,
Stainless steel handle (on
some models):
O Remove the two screws
holding the handle to the
bottom of the door,
Loosen the set screw
with the 3/32" Allen
wrench (supplied) and
remove the handle,
O Remove the handle
fastener with the 3/16"
Allen wrench (supplied), _
OTransfer the fastener to
the right side and move the GE badge to the lee side of
the freezer door, Remove the paper covering on the
adhesive backing prior to attaching the badge to the
door,
Reattach the handle on the opposite side using the holes
closest to the edge of the door,
Plastic handle:
O
@
O
Line up the handle with
the screw hole in the top Plug
of the door and tighten Button
screw,
Install the two screws
into the bottom of the
handle,
Move the plug button on
the right side of the door
to the handle screw hole
on the left side,
17