GE 20 Owner's Manual And Installation Instructions page 20

Installation Instructions
INSTALLING THE WATER LINE (cont.)
[] PLUG IN THE REFRIGERATOR
__rranoe the coil of tubing so that it does not xibrate
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.
START THE ICEMAKER
Set the icemaker power switch to the
I (on)
position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (-9°C)
or below. It will then begin operation automaticallv
if the icemaker power switch is in the I (oil)position.
NOTE: In lower water pressure conditions, the
water xalxe may turn on up to 3 times to delixer
enotwh water to the icemake_:
2O