Repeat Label - SATO GL408e Programming Reference Manual

REPEAT LABEL

FUNCTION To print a duplicate of the last label printed.
FORMAT
<ESC>C
Place immediately after <ESC>A and immediately before <ESC>Z in a separate data
stream.
EXAMPLE <ESC>A
<ESC>C
<ESC>Z
OUTPUT A duplicate of the previous label will be printed.
NOTES This command will not have an effect if the printer's power is cycled off and back on
since printing the previous label.
SATO GL4xxe SBPL Programming Reference
Unit 4: Standard Command Codes
Page 4-58