Mirror Image - SATO GL408e Programming Reference Manual

Unit 4: Standard Command Codes

MIRROR IMAGE

FUNCTION To allow mirror image printing of data, such as on transparent labels to be applied to
a glass or other transparent surface.
FORMAT
<ESC>RM
Place after the label data.
EXAMPLE
Label #1
<ESC>A
<ESC>A1<ESC>H0100<ESC>V0050<ESC>XL0ABCDEF
<ESC>RM
<ESC>Q1
<ESC>Z
OUTPUT
(4-16)
NOTES
The <ESC>A1 Media defines the area to be mirrored.
This command can be used with the Rotate Fixed Base Reference Point (<ESC>%)
command. Note that the reference point rotation is dependent upon the location of
the <ESC>% command in the data stream.
This command should not be specified more than once in any single job.
This command cannot be used with commands requiring re-editing of the print area,
such as Sequential Numbering, Real time clock or Copy Image Area.
Any data outside the area defined by the Media Size (<ESC>A1) command is not
mirrored the command is treated as a command error. Any print job containing the
<ESC>RM command and without any print data will be treated as a command error.
SATO GL4xxe SBPL Programming Reference Page 4-21