Recalling A Preset In Am / Fm Mode - Sangean RCR-9 User Manual

Note:
If you forget which preset number has been used,
during the presetting station procedure you can find out
while pressing the Tuning up/down button. If the preset
number is shown with letter 'M', indicating the preset
number is used. If not, there is no station stored in this
preset number.
5. Preset stations which have already been stored may
be overwritten by following the above procedure if
required.

Recalling a preset in AM / FM mode

. Press the Standby button to switch on your radio.
. Select the required waveband by pressing the Band
button.
. Press the Preset recall button repeatedly to tune to
one of the stations stored in the preset memory.
GB
5