Nap Timer - Sangean RCR-9 User Manual

Nap timer

. Press the Nap timer button to enter the menu setting.
. Press the Tuning up/down button to set the desired
setting from to 0 minutes with  minute interval.
. Press the select button to confirm the setting. The
'NAP' word will appear on the display.
4. To view the remaining time of an active timer setting,
press the Nap timer button . To cancel a sounding Nap
timer, press Standby button. If any button other than
the Standby button is pressed when the alarm sounds,
snooze function will be activated.
To cancel the function when countdown is progressing,
go to nap timer setting menu and select 'OFF'.
GB
7