Manual Tuning - Fm / Am - Sangean RCR-9 User Manual

Manual tuning – FM / AM
. Press the On/Off button to switch on your clock radio.
. Press the Band button to select the FM/AM band.
Fully extend the wire antenna for FM reception.
. Press the Tuning Up/Down button to tune to a station.
The frequency will change in steps of 50 kHz/00 kHz
in FM or 9 kHz in AM.
4. When the waveband end is reached the radio will
recommence tuning from the opposite waveband end.
5. Adjust the Volume buttons to the desired settings.
6. To switch off your clock radio press the On/Off button.
GB
9