Stereo / Mono Setting - Fm - Sangean RCR-9 User Manual

Stereo / Mono setting - FM

If the FM radio station being listened to has a weak
signal some hiss may be audible. It is preferable to
reduce this hiss by forcing the radio to play the station
in mono rather than stereo.
. Press the Standby button to switch on your radio.
. Tune to the required FM radio station as previously
described.
. Press and hold the Menu/Info button to enter the menu
setting.
4. Press the Tuning up/down button until 'FM AUTO or
FM MONO' shown on the display. Press the Select
button to enter the setting. If the setting is Auto press
the Tuning control to switch to Mono mode to reduce
the hiss.
5. To return to Auto (stereo) mode press and release the
Tuning control to alter the setting, so that the radio will
switch back to Auto mode.
GB