Slide Switch; Reset Button - Salus ST620WBC Instruction Manual

Salus ST620WBC Manual 013_89 09/02/2012 14:01 Page 40

SLIDE SWITCH

The Slide Switch has two positions: UNLOCKED and LOCKED. In the LOCKED position, the Touch Lock indicator
be visible on the LCD, and it will not be possible to change the ST620 settings. If you are unable to change any
thermostat settings, check that the Slide Switch is in the UNLOCKED position.

RESET BUTTON

The Reset Button is provided as a way to restore the thermostat to its default factory settings. Pressing this button will
delete any previously entered settings.
After pressing the Reset Button, the ST620 will revert to the following (default) settings:
Mode:
Programme:
Time:
DST:
Control method:
Holiday:
Frost:
Sleep:
RF address code:
RF COMMUNICATION
When the ST620 is operating in AUTO mode, if the Boiler Control has not received a signal from the ST620 after 1 hour,
the Boiler Control will turn off the boiler, and the LED indicator will flash constantly (two times every second).
Once the Boiler Control receives a valid ON or OFF signal, the Boiler Control will control the heating system accordingly.
40
Auto
6
12:00am
On
On/Off
Off
Off
Off
factory setting
ST620WBC INSTRUCTION MANUAL
will