Preparation; Enter Your Call Sign Into The Transceiver - Icom ID-51A Basic Instructions

Before starting D-STAR, entering and registering your call sign (MY) are needed, as described below.
IMPORTANT!
STEP 1 Entering your call sign (MY) into the transceiver.
gateway repeater.

Enter your call sign into the transceiver

STEP 1
Example: Enter "JA3YUA" as your own call sign into the MY
call sign memory [MY1].
Hold down [ ] for 1 second to
q
turn ON the power.
• Hold down [ ] for 1 second to
turn OFF power.
• After the opening message and
power source voltage are dis-
played, the operating frequency
appears.
[ ]
You have completed the steps!!
w
e
r

PREPARATION

STEP 2 Registering your call sign (MY) to a
Push [MENU] .
• The MENU screen is displayed.
Push D-pad( ) to select the
root item ("My Station"), and
then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "My
Call Sign," and then push D-
pad(Ent).
• The MY CALL SIGN screen is
displayed.
Continued on the next page
MENU screen
Go to step t
This is page 2.