Step4 Check Whether You Can Access The Repeater - Icom ID-51A Basic Instructions

If the selected repeater name
t
in step r is displayed in "TO"
on the DR mode screen, the
destination repeater setting is
completed.
Check whether you can access the re-
STEP 4
peater
Hold down [PTT] for approxi-
q
mately 1 second to access
the repeater.
w
Completed
Transmitting
Go to step w
NOTE: See page 35 for status indications after a reply is
received.
ACCESS THE REPEATER
If you get a reply call, or "UR?"
appears on the LCD within 3
seconds, your signal reached
your access repeater and your
call was successfully sent from
your destination repeater.
Successfully sent!
Now, you can make calls
to various repeaters by
changing the "TO" setting!
1
1
20