Calling A Destination Station; Step1 Set "From" (Access Repeater) - Icom ID-51A Basic Instructions

6

CALLING A DESTINATION STATION

You can make a call to a destination station when the destina-
tion station call sign is selected in "TO" (Destination).
When you call an individual station call sign through a gate-
way, the signal is automatically sent to the last repeater that
the station accessed. So, even if you don't know where the
station is, you can make a call using call sign routing.
Repeater
31
Repeater
JM1ZLK
STEP 1 Set "FROM" (Access repeater)
Push D-pad( ) to select
q
"FROM," and then push D-
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Re-
w
peater List," and then push
D-pad(Ent).
Push D-pad( ) to select the
e
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
• Example: "11: Japan"
Push D-pad( ) to select your
r
access repeater, and then
push D-pad(Ent).
• Example: "Hirano430"