Icom ID-51A Basic Instructions page 19

Push D-pad( ) to select the
e
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
• Example: "11: Japan"
Push D-pad( ) to select your
r
access repeater, and then
push D-pad(Ent).
• Example: "Hirano"
Repeater area Repeater
call sign
Go to step t
ACCESS THE REPEATER
If the selected repeater name
t
is displayed in "FROM" on
the DR mode screen, the ac-
cess repeater setting is com-
pleted.
• When you select just the repeater name, the repeater call
sign, its frequency, duplex setting, frequency offset and
Gateway call sign are automatically set.
• The repeater list, described in this manual, may differ from
your transceiver's preprogrammed list.
1
Completed
Completed
Continued on the next page
☞
1
18