Other Functions; I Initial Set Mode - Icom IC-T7H Instruction Manual

I Initial set mode

Initial set mode is accessed at power ON and allows you to
set seldom-changed settings. In this way you can "cus-
tomize" transceiver operation to suit your preferences and
operating style.
D Entering initial set mode
➀
While pushing [ SET] push [POWER] to turn power
(H/L)
ON.
• The transceiver enters initial set mode and the last-selected (or
default) item is displayed.
➁
Push [H/L] or [TONE] one or more times to select the
desired display as described on the following pages.
➂
Rotate [DIAL] to select the desired condition.
➃
Push [VFO] to exit initial set mode and select VFO opera-
tion.
D Message
When no operation is performed for 5 sec. in initial set mode,
a message scrolls across the function display prompting you
for input.
• Message example
for microphone simple mode

OTHER FUNCTIONS

D Optional HM-75A functions
POWER ON
AT
This item turns the microphone sim-
ple mode ON or OFF. Microphone
simple mode is used to change the
function assignments for switches on
the optional HM-75A
TROL MICROPHONE
assignment is convenient for 3-chan-
nel use of simple operation.
SWITCH
A
B
NOTE: VFO mode cannot be selected via the microphone
when SIMPLE mode is selected.
-
REMOTE CON
as below. This
NORMAL
VHF/UHF
Toggles VHF and UHF.
No function in memory mode.
VFO/MEMORY
Toggles VFO and memory
mode.
Change the fre-
quency or memory
UP
channel when
pushed.
Starts previously
selected scan
DOWN
when pushed and
held.
5
SIMPLE
MONITOR
Toggles squelch
between open/close.
CALL
Selects the call chan-
nel.
M1
Selects memory chan-
nel 1.
M2
Selects memory chan-
nel 2.
23