Table of Contents
Advertisement
FS-8700-24 ControlNet Driver Manual
3.
Hardware Connections
The FieldServer is connected to the ControlNet Network with 75 ohm coaxial cable. If the
ControlNet is not wired in redundant mode, ensure that all connectors are connected to the
COM A port. A 75 ohm terminator must be placed at either end of the ControlNet Bus.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
SST-5136-CN-ISA
FS-x40
A
75 O T-pieces
75 O network terminators
B
To ControlNet Network
FIELDSERVER
CONTROLNET
CONNECTION DIAGRAM
BASE NAME:
FILE NAME:
FS8700-24
Page 5 of 12
(408)-262-2299
DATE: 11/4/05
BY:
MC
Advertisement
Table of Contents
