Step 9 - Replacing The Light Bulb - Hunter Fans Installation And Operation Manual

STEP 9 - REPLACING THE LIGHT BULB

Instructions for unassembling the
globe when replacing a light bulb.
1. Unassemble the finial assembly
as shown in Figure 9a.
2. Install one 100 Watt light bulb.
Refer to Figure 9b.
3. Loosely reassemble the finial
bracket, cover plate, and finial.
Refer to Figure 9a.
Finial Bracket
Cover Plate
Finial
Assembly
Finial
Figure 9a - Unassembling the finial
41557-01 3/12/2002
4. Assemble the finial to the bot-
tom of the globe assembly as
shown in Figure 9c. Viewing the
assembly through the globe, line
up the finial bracket with the
tabs in the bottom part of the
globe assembly.
5. Securely tighten the finial.
Globe Assembly
Light Bulb
Figure 9b - Installing bulb Figure 9c - Assembling the finial
®
21