Operating Your Hunter Fan - Hunter Fans Installation And Operation Manual

®

OPERATING YOUR HUNTER FAN

1. Turn on electrical power to the
fan.
2. There are three pull chains on this
fan; one for fan operation, one
for light operation and one for
reversing the fan.
NOTE: Use the following direc-
tions for operating all pull chain
switches.
• Pull the chain slowly to change
settings.
• Release slowly to prevent the
chain from recoiling into the
blades.
• The chain uses a breakaway
connector that separates if the
chain is jerked. If this happens,
simply reinsert the chain into
the connector.
22
3. The pull chain controls power to
the fan. The chain has four set-
tings in sequence: High, Medium,
Low and Off.
4. Ceiling fans work best by blow-
ing air downward (counterclock-
wise blade rotation) in warm
weather to cool the room with a
direct breeze.
In winter, having the fan draw air
upward (clockwise blade rotation)
will distribute the warmer air
trapped at the ceiling around the
room without causing a draft.
To change the direction of air
flow, turn the fan off and let it
come to a complete stop. Pull the
reversing switch chain on the fan
to the next position as shown in
Figure 10b. Restart fan.
Figure 10a - Air Flow Patterns
41557-01 3/12/2002